The patio is measured at 12×16 feet. The deck requires boards to define the deck. First, you need to determine if the deck has a slope. If so, the home has an inch of slope therefore the water will run away from the property. The first step is to begin with rebar. It will reinforce where the concrete would like to crack. After that, you’ll need to start with water. Mixing the concrete will be the next stage. Depending on the location of the water supply, the concrete mix may need to be made in the front of your yard. It is also possible to call a concrete contractor. The next step is to make a joint 8 feet through the center for it to be divided into two segments. When it becomes drier, and you start to see lots in the way of water from the top, you want to remove the trowels. This will smooth it out for aesthetic reasons. Concrete compound can be utilized to retain moisture if the concrete does not seem to dry fast. This can reduce the chance of concrete cracking. Drying concrete in the sun will make a huge difference. ij6o5nnhne.